RWIS toolkit to support Woodside Energy's Scarborough project NW Australia
23 Sep 2022
Houston, TX – Trendsetter Engineering, Inc., a leader in subsea equipment design and manufacture, is pleased to announce that they have been contracted to provide access to the RWIS Toolkit.
The RWIS Toolkit, co-developed by Add Energy’s well control and flow specialists, facilitates high rate kill requirements through a single relief well and is a critical piece of subsea equipment placed on the seabed below the BOPs of a primary and secondary Relief Well Drilling Rig. In the event of a loss of well containment, this equipment is called upon to assist with dynamic kill operations via a single relief well. The system allows for the supply of high mud pumping rates via a single relief well intercept that would otherwise require two or more relief wells minimum to achieve. As a result, the RWIS can typically allow for drilling of prolific reservoirs that previously challenged the ability to provide a single relief well contingency.
“The RWIS has been designed and built to enable operators to stop a blowout from prolific reservoirs safely and efficiently via a single relief well by increasing the pump rate of kill mud into the blowing well,” said Brett Morry, Product Service Line Manager at Trendsetter Engineering. The RWIS is capable of pumping more than 200 barrels of kill mud per minute through a single relief well; three times as much kill fluid as is typically achievable. Per Brett Morry, “This is a significant advance for the industry which can now drill a single relief well as opposed to the alternative method requiring multiple relief wells. In regions where offshore assets are in short supply, this becomes a critical means to ensure single relief well contingency.”
The RWIS not only makes potential relief well operations safer, it can also lead to a potential economically improved development plan. Added Brett Morry, “In purchasing access rights to the RWIS toolkit, operators are now able to still comply with legislation but reduce the number of wells required to meet production targets by increasing the completion size of the well bore, reducing CAPEX costs and maximizing production.”
Trendsetter Engineering, Inc. is a privately owned oil and gas service company based in Houston, Texas which provides specialized subsea hardware and offshore service solutions globally from exploration drilling through abandonment.