Drilling and Well Operations
Asset and Integrity Management
Safety and Risk
Training and Advisory
Health, safety, environment and quality (HSEQ)
Management and The Board
Prevention of an uncontrolled release of underground fluids to the environment
Reduce the likelihood of an uncontrolled release
Protect the safety of your people, assets and our environment
Avoid costly and reputational damage associated with incidents
Assure compliance with local and corporate standards, regulations and legislation
Identify possible risk and put mitigation measures in place to eliminate it
Ensure a competent team to effectively manage and mitigate risks
Add Energy provides a complete well integrity management system that is compliant with applicable standards and legislation.
Our experts perform technical integrity assessments of the well barriers and their components in order to categorize the wells and identify risk mitigation requirements.
We compare the well- , casing- and tubing design basis and develop programs with recognized standards and guidelines (NORSOK D-010 / UKOG Guidelines / ISO) to measure compliance, identify gaps and propose solutions to enhance integrity.
Our team of specialists conduct thorough technical investigation of incidents through interviews, assessment of reports and calculations to identify the cause, and provide recommendation actions to prevent incident reinsurance.
Increase competency around the fundamentals of well integrity measures aligned with the NORSOK D-010 well integrity standard, which focuses on the establishment of well barriers and well barrier elements to prevent loss of integrity.
Add Energy provides subject matter experts and specialists to work as integrated members of our client’s team, in the office, on the rig or at the well site. This solution has been designed to enhance the competency of your workforce, provide expert advice or manpower required to deliver well integrity management programs.
"Add Energy’s well integrity consultant conducted an analysis and assessment of our existing well integrity management system, and provided recommendations for improvement that were implemented at a corporate level"
Following a significant loss of 28 rig days due to a gas leak from the well, Add Energy was contracted to conduct a technical investigation of the planning and execution performance of a plug and abandonment exercise of the subsea exploration well.
What We Did
We collected and analyzed data and conducted interviews to compare plans and execution performance versus requirements in the local regulations, the client’s Management system and the NORSOK D-010 Well Integrity standard.
The planned plug and abandonment design solution was found to be non-compliant with NORSOK D-010 and improvements to the client’s Well Barrier Philosophy were recommended by Add Energy.
Chief Technical Officer - Well Integrity
If you'd like to learn more about our range of drilling and well services, or want to discuss your project with us, please get in touch by completing the form below...
As part of Woodside Energy’s field development plans, Add Energy supported Woodside’s Drilling and Completion team with the well engineering services for the successful delivery of a new subsea big bore gas well.
As part of the incident investigation team and engineering task force, Add Energy provided dynamic analysis, simulations, planning and evaluations for the kill operation.
To provide the operator with assurance that robust blowout contingency measures were put in place to reduce environmental, safety and business impacts should an uncontrolled hydrocarbon release occur
To help our client optimize production through an efficient well management solution
30 Jun 2020
17 Jun 2020
In certain regions of the world, and for some operators, regulations and internal procedures mandate that fields cannot be developed unless the operator can demonstrate that the well can be intercepted and controlled via a single relief well drilling operation, as opposed to multiple relief wells, which is usually the norm.
05 Jun 2020
Safety is always the number one priority in drilling operations, but this can often impact an operator’s ability to reach their targets and optimize future production. However, there are ways engineers can increase the efficiency of field development and maximise production, without compromising safety.
13 May 2020
Whilst production optimization creates significant cost benefits for a business, it is critical to note that additional risks are introduced when bigger bores are developed. These include, but are not limited to:
29 Apr 2020
During a period of low oil price, it is even more critical to optimize costs and identify ways to meet production targets with less expenditure.
24 Apr 2020
This week marked the 10th anniversary of the Deepwater Horizon incident that took the lives of 11 men and wreaked havoc on the environment, as well as the oil and gas industry globally.
26 Mar 2020
21 Feb 2020
02 Jul 2020
19 Mar 2020
13 Mar 2020
17 Oct 2019
15 Oct 2019
01 Oct 2019